Malibran State of the Art Loudspeaker

SKU: 1372 Categories: , ,

Description

The Malibran model is the first speaker designed by Opera and marketed under the trademarks Unison. This speaker concentrates  the technology and know-how of the top of the line Opera loudspeakers. The basic idea is still the same: to deliver a high quality passive speaker  with acceptable dimensions for your home. This was made possible by the new high excursion 10″ woofer: a pair of Malibran, with 6 10″ woofer, can move three  litres of air.  Malibran  sets new limits in terms of dynamic, bass extension and low distortion. The reconstruction of the acoustic scene, another peculiarity of this speaker, has unique qualities near the limits of the  holographic reconstruction of the sound stage. The frequency response is extended and regular, impulse response is fast and well defined, the impedance curve is very smooth and conforms to DIN: the Malibran can be matched to a good HiFi amplifier starting from 10-15 watts even if they give the best with more powerful amplifiers.

The heart of Malibran is the front speakers (four mid-woofers and tweeter) that reproduce from   then mid-bass to the extreme audible.  The four mid-range are connected to progressive low pass filter. This filter topology, developed by Opera, allows a system to act as a single large area woofer at low freq. And as a small midrange  at  high frequency ensuring excellent  linearity.  Malibran behaves as if it has a 18” sub-woofer, an 10” mid-bass unit,  5″ midrange and a one inch tweeter but without the complexity of a four-way system and with the consistency of emission typical of much smaller speaker.

The group of midrange reproduces in full a  number of instruments and virtually the entire voice spectrum. Only the last note of the  flute falls  near the frequency crossover. This choice makes a significant contribution to the consistency of representation and reconstruction of the acoustic scene in particular on the vertical axis. Voices and instruments tonally correct and precise located in space, well-focused and credible with a physical dimension.

The lower section of Malibran uses three high-excursion 10? woofers with aluminium cone and the  total radiating area like a 18? woofer. Each woofer is loaded in a 40 litres closed box adequately damped with lining material. The division of the cabinet into smaller volumes increases the stiffness and eliminate low-frequency standing waves. The three woofers, mounted on the side of  the cabinet, limit the influence of the side walls of the room making the placement easier. The choice of the load  in totally enclose  box avoids any noise or turbulence produced  by tubes and gives the ideal low frequency  damping.

The Malibran also has 4 tweeter on the rear side: the  CLD device. The CLD was introduced first by opera with the Tebaldi model and has already been amply illustrated in the working principles and advantages in reproduction in terms of better Brilliance and Spaciousness (three-dimensional detail and reconstruction).

  • Technical characteristics
    • System: Floor standing, TEB
    • Drivers:  3 x 10î  Seas woofer, aluminium cone, 4 Seas midranges with magnesium cone 1 front tweeter  1? ScanSpeak (9000 series) 4 rear tweeter 1? (Cross-Linked Dipole)
    • Number of ways: 3 +  rear radiation
    • Frequency response: 20-30000 Hz
    • Cross-over: Woofer in parallel + double low-pass a 6+6 dB/ott
    • Midrange: progressive low-pass filter +  high-pass of the second order Front Tweeter,  12 db  high-pass Cross-over freq. 160-2000 Hz
    • Power: 750 watt RMS or more without clipping
    • Amplifier: starting from  10 Watt
    • Sensitivity: 89 dB dB/1watt/1 meter
    • Nominal Impedance: 4 ohm (Z min > 3.1 ohm)
    • In room: 30 cm from the rear wall,  minimum distance between speakers:  1.5 meters,  woofers firing to each other
    • Size: 136 x 44 x 80 cm (h, w, d)
    • Weight : 130 Kg